The energy of laser beams can be analyzed
Main Applications:
Monitor multiple beams’ centroids
QC of lasers
Laser beam analysis: Profile, beam size, position, power
Accurate: High resolution CCD having 12 bit true dynamic range
Versatile: A complete test station measuring Profile, Power and Position, both for CW and pulsed beams
Portable: Based on a USB 2.0 interface for notebooks (or desktops)
Easy to use: user-friendly software, on-line help routine
Accessories: Complete set for larger beams and high power attenuation
Main Software Features:
Real time beam size and gausian fit (or top hat)
2D/3D plots of beam in real time
Beam centroid tracking and chart with time
Software controlled electronic shutter & gain
Video with playback, snapshot files
Data exporting to another computer via RS232 or TCP/IP
Data logging with detailed statistics
ActiveX package to control software from your application
Automatic Pass/Fail analysis report
Motorized automatic filter wheel (AFW model) enables optimized setting of electronics parameters and enlarging the dynamic range
CCD Head Specificatios
Camera Type: Monochrome interline transfer progressive scan, 1.4 Megapixel CCD ½” format
Pixel size: 4.65μmX4.65μm Sensor active area: 6.47mmX4.83mm
Weight: 165 gr.
Trigger in: RCA female jack, 4.5V square wave TTL
Power consumption: 6V, 4Watts
Mounting threads: 3/4” X 32 when filter wheel removed
Accessories included: Filter wheel with 3X NG Scott colored filters (NG4, NG9, NG10) in housing. Adaptor ring for user filter. Mounting post.
System performance with software
Spectral response: 350-1310nm
Max frame rate: 15fps at 1392x1040, 30 fps with binning (2X)
Image resolution: 1392X1040
Shutter speed: 0.6sec to 1μsec
Gain control: X1 to X23
Dynamic range: 60DB not including filters
Damage threshold: 50W/cm2 with filters
Sensitivity: 5nW/cm2 @ 633nm, 60μW/mm2 @ 1310nm
Saturation: 2mW/cm2
Operation with pulsed lasers: Ability to capture and replay images from slowly pulsing lasers (1-100Hz) while filtering out frames with no laser pulse. Provision for displaying single shot pulses.
Hardware triggering: in pulsed mode set threshold by slide bar to display frames with captured pulses
Spectral response: 1550nm±50nm
Sensitivity: 22μW/mm2
Saturation: 10mW/mm2
General Specifications
PC interface: High speed USB2.0 (480Mbits/sec)
RS232: Data out
Operating temp: 0ºc to 50ºc
Humidity: 5% - 95% non-condensing
CE compliance
Ordering Information
BeamOnHR: A camera for 350-1310nm, a standard USB2.0 cable, a post, a set of 3 X ND filters in housing on a built-in filter wheel (removable), software on CD disk,carrying case.
BeamOnHR1550: A camera for 1550nm±50nm
BeamOnHR-AFW: BeamOn HR with motorized filter wheel
Accessories:
SAM1 Beam sampler (ratio 3X10(-3))
SAM2 Beam sampler (ratio 1X10(-6))
SAM3-A Beam sampler polarization preserving (ratio 0.0016 Avg.)
RDC Beam reducer (ratio 2X1)
MountB Mounting base
ND-FILT 1/8 ND filter, M37X0.75
NG-Filters 1.6mm thick Schott colored filter in housting with adaptor, types: NG4 / NG9 / NG10
Adapter C-Mount adapter ring
Host computer Requirements
Pentium IV 2GHz , 512MB RAM , 10MB Free HDD 64MB 24 bit color VGA card, resolution (min) 1024x768, 1 Free High Speed USB2.0 port, CD ROM any type, WinXP/Vista/7, 32 bit & 64 bit.