With more than 30 years of history meeting ESD susceptibility testing requirements, the 930D is the industry’s most consistent gun solution. Focused on delivering ESD testing at the system level, ESD guns create discharge events in accordance with various industry specifications over a wide range of voltages. Operating the 930D is easy thanks to the clearly defined user interface and robust gun design. The unit’s deliberate simplicity yields industry leading waveform consistency, a crucial benefit most modern guns fail to provide. With many standard and custom Discharge modules available the 930 is certain to address your system-level ESD testing needs.
ANSI/ESDA/JEDEC JS-001-2107, IEC 61000-4-2, MIL STD 331 & 883, Automotive ISO 10605-2008;
Applications
• System level ESD survivability
• Automotive testing
• Commercial electronics
• Military testing
• CE compliance testing
• UL compliance testing
• Process simulation
• Textile testing
Key Features
• Voltage range: ±100 - ±26,000V (Optional: Up to ±30,000V)
• Contact and Air Discharge capabilities
• Remote discharge capability
• High Quality waveform where accuracy counts
• Test data is stored in memory and can be easily downloaded.
• Custom discharge network modules are available
• Numerous mounts and fittings available for gun positioning
• System comes packaged in an industrial carrying case
Control Unit:
Range:
LO: ±100-±6000V
HI: ±3-±26,000V (30kV optional)
HV Adjust: multi-turn potentiometer
Displays:
Voltage Level: 4½-digit LED, 0.5” (12mm) numerical
AUTO mode: 1-digit LED, 0.5 (12mm) numeric
Resolution:
±10V
Accuracy:
Better than 5%
AUTO Mode:
Discharges: 0-9
Interval: 0.3-10sec
Power: 90-260VAC, 50/60Hz
Interconnect Cable: 12’ (3.7m) 15-pin sub-D conn.
Dimensions:(Case): 19”Wx15”Dx10”H (48x38x25cm) Weight: 15 lbs (6.8kg)
Gun Unit:
HV Switch: Gas filled, 35kV, SPDT Relay
R/C Networks Available
• HBM: 100pf Cap Module & 1500Ω Resistor Module
• IEC: 150pf/330Ω Module & 0Ω Resistor Module
• MIL STDs: 500pf Cap Modules 0, 500, 5000Ω Resistor Modules
• Automotive and Custom R/C Networks:
Capacitor: 60-1000pf
Resistor: 100-5,000Ω
Output/Gnd: Standard 0.161” (4mm) Banana jack
Probe tips:
HBM, MM & IEC (Systems): 0.5” (12mm) Conical & Point
Cables:
IEC: 80” (2m) Gnd, Banana-Banana plug plus clip
HBM, MM (Devices): 8” (20cm) Banana-Minigrabber
MIL STDs: 24” (60cm), Banana-Banana plug plus clips
Options:
Bleeder resistor: 25 megohm across output and Gnd
