Portable Appliance Tester

  • Product No:6080A
  • Manufacturer:Transmille Ltd.

Re-defining rapid safety testing, the Transmille 6080A battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. An ideal solution for reducing PAT testing costs by performing testing in house.


Providing instant 'One Click' testing, the 6080A provide instant visual feedback on the pass/fail status of an appliance, indicating pass/fail through LED indicators on the front panel of the instrument.


Compared against the 5080A PAT tester, the 6080A adds the following features : 

  • 110V and 230V appliance test functions
  • Dedicated IEC/Extension lead testing functionality
  • Self Test function
  • Fuse check function
  • Larger battery for additional tests between charging cycles

Automating the processor of recording pass/fail results, the 6080A provides data download functionality to your computer, and is fully compatible with Transmille's PRODRS software and Simply Pats software

  • Standalone battery operation

  • 230V and 110V appliance testing, essential for worksite environments

  • Bond current @ 25A / 10A / 100mA - All under battery power

  • Insulation resistance @ 500V

  • Leakage Current @ 230V

  • IEC / Extension lead testing

  • Self Test function

  • Appliance Fuse Test

  • Fuse check function

  • Visual pass/fail test

  • Fast charger included

  • Data download ready

  • Compatible with Transmille PRODRS software and Simply Pats software

     

     


The 6080 adds dual voltage capabilities for complete 110V / 230V compatibility with sockets for each voltage.


The IEC / extenstion lead check function allows leads to be verified at the press of a button. Using the self check function, the 6080 can be verified using its own built in test facility - simply connect to the self check terminals to verify PAT operation. This unique function avoids the need for a separate test box.


 The 6080 also includes larger battery capacity to provide typically up to 700 tests between charging.


The go-anywhere range of PATs from Transmille can literally save you hours. Firstly, there is no need to waste time locating a mains supply - simply plug in the appliance, clip on the earth bond lead and select or test. Secondly, within 20 seconds the entire test sequence is complete - unlike other PATs there is no lengthy setup before you can even begin. Earth bond current is detected from the socket used, and test limits are scaled automatically from the earth bond current and lead length settings. Clear red/green LED indicators make reading the test result easy inany situation. Testing really Is that quick & easy. The compact, yet rugged design is ideal for squeezing into those difficult to reach areas around desks, in the workshop or even in the back of your van.



Earth Bond Resistance measurement : 0 to 10 Ohms @ 100mA / 10A / 25A Nominal (5s into S/C) : 3% ± 4 Digits
Insulation Resistance Measurement : 0.1M Ohms to 100M Ohms @ 500V : Accuracy 3% ± 4 Digits
Leakage Current Measurement : 0.1mA to 15mA @ 240V / 50Hz : Accuracy 3% ± 0.2mA
Fuse Test : Pass / Fail : Checks power switch on & fuse OK (using 230V)
IEC / Extension Lead Correction : Slider control 1 to 20m
Lead Length Correction : Slider control 1 to 5m
Mains Operation : Continuous operation with charger supplied
Recharge time : 6 hours
Battery life : Typical 700 tests per recharge
Internal Memory Capacity : 1000 Tests (unlimited with PC based storage)
Dimensions : 390mm x 280mm x 110mm : Weight 3.5kgs