With Plastic body, its total weight perform less 30%.
Safety operation with minute discharge detection and over current detection.
Wide or straight ionization with two kinds louver part.
Input power supply： 24 VDC (with AC 100~240V ACadapter)
Electric consumption： 6 VA
Output voltage ：±7,000 V0-p
Ion balance： ±10V or less (Distance at 300mm)
Air Volume ：0.7 to 1.2 m3 / min
Air speed： 1.2 to 1.9 m / sec (with Straight Louver at 300mm center)
0.7 to 1.2 m / sec (with Wide angle Louver at 300mm center)
Ozone density ：0.004 ppm or less (distance 150 mm)
Operating Environment： 0 to 40℃ / 15 to 85% RH (no condensation)
Filter： Pre-filter level
Output signal Normal: ON, Abnormal (HV alarm or fan alarm with Red LED light): OFF MOS FET Relay, Normally Closed contact.
Maximum current: 200mA, Voltage: Below 30VDC.
Main unit dimensions： 104×126×67 mm (W×H×D) not including projecting portion
Weight： Approx. 560g (including stand)
Noise： 51 dB(A) (distance 1 m)
Accompanying items ：Operation manual, AC adapter, signal output cable, cleaning brush, Wide angle louver
Optional parts ：Emitter needle unit :DNU-W60
Filters :OBF-FZA-1-10(package of 10)
