The Precision Multiferroic II Ferroelectric tester is the most advanced test system on the market.The Multiferroic II has a unique frequency rating of 270KHz at +/-100V built-in to the system.The Multiferroic II tester makes testing of thin films and bulk ceramics a fast and simple process.
The Multiferroic II executes hysteresis, pulse, leakage, IV, and CV measurements without changing sample connections.With the addition of extra fixtures,the Multiferroic II can measure pyroelectric properties, magnetoelectric properties, transistor characteristics, cryogenic properties, and bulk and/or thin film piezoelectric properties.
The Precision Multiferroic II is offered with a variety of internal amplifiers.The Multiferroic II is offered with a ±100V, 200V and 500V built-in drive volt option.The Multiferroic II can be expanded to 10kV with the addition of a high voltage interface and an amplifier.Includes Vision Data Acquisition and Management System Software.
| Tester Parameter | MultiFerroic II |
| Voltage Range (built-in drive voltage) | ±10V, ±30V, ±100V, ±200V or ±500V built-in |
| Voltage Range with an external amplifier and high voltage interface (HVI) | 10KV |
| Number of ADC Bits | 18 |
| Minimum Charge Resolution | 0.80fC |
| Minimum Area Resolution (assuming 1 ADC bit = 1μC/cm2) | 0.080μ2 |
| Maximum Charge Resolution | 5.26mC |
| Maximum Area Resolution (assuming saturation polarization = 100μC/cm2) | 52.6cm2 |
| Maximum Charge Resolution with High Voltage Interface (HVI) | 526mC |
| Maximum Area Resolution (assuming saturation polarization = 100μC/cm2) w/o HVI | >100cm2 |
| Maximum Hysteresis Frequency | 270KHz @ 10V |
270KHz @ 30V | |
270KHz @ 100V | |
100KHz @ 200V | |
5KHz @ 500V | |
| Minimum Hysteresis Frequency | 0.03Hz |
| Minimum Pulse Width | 0.5μs |
| Minimum Pulse Rise Time (5V) | 400ns |
| Maximum Pulse Width | 1s |
| Maximum Delay between Pulses | 40ks |
| Internal Clock | 25ns |
| Minimum Leakage Current (assuming max current integration period = 1 seconds) | 1pA |
| Maximum Small Signal Cap Frequency | 1MHz |
| Minimum Small Signal Cap Frequency | 1Hz |
| Output Rise Time Control | 105 scaling |
| Input Capacitance | -6fF |
| Electrometer Input All Test Frequencies for all test at any speed | Yes |
