3 Dimensional Backplane Profiling System

  • Product No:603d
  • Manufacturer:Testroincs Co.

The Testronics 603d system utilizes a Confocal Chromatic line sensor which projects a total of 180 individual beams (spots) onto the backplane at the same time. The profile (height / depth) data of all 180 beams is acquired simultaneously within 0.0005 seconds, (0.5 mS). The system scans the connector up and down & back and forth, creating a complete 3d profile of the connector, (pins, pin tips, holes, pins in the holes, back drilled holes, etc). +/- tolerences on each pin can be assigned. Because quantifiable measurement data is acquired on each pin, pass / fail decisions are very reliable and repeatable.

  1. Maximum Board Size:

  • Maximum Board Size:127cm x 76cm (50” x 30”)

    2. OptoElectronic Controller

  • Maximum measuring rate:1,800 lines per second x 180 points per line = 324,000 measured points per second

  • Number of measured points along a line:180 points in a line

  • Maximum measuring rate per line:0.0005 seconds per line

  3. Optical Head

  • Line length (x axis):44.75mm (1.76")

  • Number of points along the line:180

  • Spot size diameter (for each point):50 microns (1.97 mil")

  • Pitch (distance between 2 points):250 microns (9.84 mil")

  • Working distance:36mm (1.4")

  • Measuring range:2mm (.078")

  • Resolution:0.5 micron (.0197 mil")

  • Accuracy:2.5 micron (.098 mil")

  4. Stage

  • X axis:Travel: 127cm (50"), Speed: 15cm (6") per second, Positional accuracy: 2.6 microns (.1 mil")

  • Y axis:Travel: 76cm (30"), Speed: 15cm (6") per second, Positional accuracy: 2.6 microns (.1 mil")

  • Z axis:Travel: 15cm (6"), Speed: 5cm (2") per second, Positional accuracy: 2.6 microns (.1 mil")