•Sub-nanometer resolution and accuracy
•Works with both cw and pulsed lasers
•Built-in thermal regulation for long-term stability and low noise floor
•Data output via USB to Windows/MacOS/Linux using included LambdaMeter application software
•ASCII command set for simple device control
•5 adjustable transimpedance gain ranges and 24-bit ADC
•On-board unit specific calibration data
•Wavelength range 365 to 1100 nm
•ISO/IEC 17025 accredited by NVLAP (NVLAP lab code 200823-0) for calibration accuracy
Wavelength Range 365 nm to 1,100 nm (short wave infrared options possible)
Wavelength Absolute Accuracy ± 0.25 nm1
Wavelength Repeatability ± 0.01 nm
Irradiance Absolute Accuracy ± 1%
Irradiance Repeatability / Stability 0.1%
Measurement Time 100 msec
Interface USB 2.0 type B connector
Interface Protocol Simple ASCII commands
Supported Operating Systems USB drivers for Windows, MacOS, Linux via FTOI virtual COM port Dimensions Height 160 mm, width 90 mm, depth 63 mm
Input Voltage 100 - 240 VAC 50/60 Hz
Operating Temperature 15°C - 35°C
Humidity < 85% RH, non-condensing